Can-Am Spyder RT 2019 Operator'S Manual Download Page 40

Page: 40 / 187

EQUIPMENT

rmo2010-001-046_a

1. Maximum opening of seat

Storage Compartments

Opening the Side Storage
Compartments

The side storage compartment latches
are located at the rear of vehicle.

rmo2010-001-047_a

1. Latch for the left side storage compartment
2. Latch for the right side storage compartment

If locked, use the ignition key and un-
lock all the latches at the same time by
turning key counterclockwise.

rmo2010-001-048_a

1. Turn counterclockwise to unlock

Pull the left side latch to open the left
side storage compartment cover and
pull the right side latch to open the right
side cover.

rmo2010-001-049_a

1. Opening the left cover

The chosen storage compartment
cover will open.

NOTE:

Be aware that objects may

have moved while riding. Pay atten-
tion not to drop objects while opening
the cover.

Always latch the cover after usage.

When finished, lock the latches if de-
sired. Turn key clockwise.

______________

Summary of Contents for Spyder RT 2019




























































































































































































Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands

Can-Am Spyder RT 2019, Operator'S Manual

Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands