Can-Am Spyder RT 2019, Operator'S Manual

Page: 133 / 187

MESSAGES IN MULTIFUNCTION GAUGE
INDICATOR LAMPS (MALFUNCTIONS)
INDICATOR
MESSAGE/
WARNING
CAUSE WHAT TO DO
BRAKE
FAILURE - LOW
BRAKE FLUID
Low brake fluid
level or faulty
sensor
– Check for brake fluid leaks.
– Check brake fluid level and
adjust (see
MAINTE-
NANCE PROCEDURES
).
LIMP HOME
MODE
Important
engine
management
component or
VSS malfunction
* Have the vehicle transported to
the nearest authorized Can-Am
On-Road dealer.
LOW OIL - STOP
ENGINE
Low oil pressure
– Check for oil leaks.
– Check oil level and adjust
(see
MAINTENANCE
PROCEDURES
.
* BRP recommends having the vehicle transported when in LIMP HOME. If you operate
the vehicle in LIMP HOME, avoid abrupt maneuvers and immediately go to the nearest
authorized Can-Am On-Road dealer to have your vehicle serviced before riding again. In
LIMP HOME, the engine RPM is limited and therefore the vehicle speed.
Important information messages can
also be displayed temporarily to assist
indicator lamps.
219001827-403_a
TYPICAL
When a digital warning appears, it will
show the warning for 6 seconds and
then the warning will disappear for 60
seconds. During the 60 seconds, the
small digital indicator will flash. This
sequence will be repeated three times
and then will stop for 15 minutes. Dur-
ing the 15 minutes only the indicator
lamps will be activated.
______________
131