Can-Am Spyder RT 2019, Operator'S Manual

Page: 132 / 187

MESSAGES IN MULTIFUNCTION GAUGE
Important information about vehicle condition is displayed on the multifunction
gauge. When starting the engine, always look at the gauge for any indicator lamps
or special messages.
INDICATOR LAMPS (MALFUNCTIONS)
INDICATOR
MESSAGE/
WARNING
CAUSE WHAT TO DO
BAD KEY Defective key
Contact an authorized Can-Am
On-Road dealer.
WRONG KEY Wrong key
Use the right key for the vehicle
or contact an authorized Can-Am
On-Road dealer.
CHECK KEY
Defective key
Contact an authorized Can-Am
On-Road dealer.
HIGH ENGINE
TEMPERATURE
Engine is
overheating
– Stop and wait for engine
to cool off.
– Check for leaks.
– Check coolant level and
adjust (see MAINTE-
NANCE PROCEDURES ).
SUSPENSION
FAULT
Air controlled
suspension
malfunction
– Check pressure in the air spring
– Check rear suspension position
sensor
– Have the vehicle transported to
the nearest authorized Can-Am
On-Road Dealer to verify the Air
Controlled Suspension Min/Max
values calibration.
!
BRAKE
FAILURE
EBD
malfunction
Have the vehicle transported to
the nearest authorized Can-Am
On-Road dealer.
TRANSMISSION
SIGNAL FAULT
Transmission
Control Module
component
– Remove key, wait 20 seconds,
and reinsert key.
– Have the vehicle repaired
by an authorized Can-AmOn-Road
dealer.
CHECK DPS
Dynamic
power steering
component
Have the vehicle repaired by an
authorized Can-Am On-Road dealer.
130
______________