Can-Am Spyder RT 2019 Operator'S Manual Download Page 26

Page: 26 / 187

SECONDARY CONTROLS

13) Switch Cluster

The switch cluster is located above the
glove box. It gives control of numerous
electrical accessories.

NOTE:

The switch cluster is opera-

tional only when the engine is running
and the battery voltage is over 11 Vdc.

219001827-009_a

1. Driver's heated grip switch
2. Fog light switch (option package)

Driver's Heated Grip Switch

219001827-009_b

1. Heated grip switch

The heated grip switch allows to turn
on and off the heated grips and to con-
trol the heating intensity.

For minimum heat, press the LO inten-
sity side of the switch.

For maximum heat, press the HI inten-
sity side of the switch.

To select the OFF position, set the
switch to the middle position.

219001827-009_c

1. HI intensity
2. LO intensity
3. OFF (middle position)

NOTE:

The heated grips will auto-

matically turn off when ignition key
is turned to OFF.

Fog Light Switch (Option Package)

All models except European,
Japanese, and Australian models

219001827-009_d

1. Fog light switch

Press on the switch icon to turn on the
fog lights.

219001827-009_e

1. Press here to turn on

______________

Summary of Contents for Spyder RT 2019




























































































































































































Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands

Can-Am Spyder RT 2019, Operator'S Manual

Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands