Can-Am Spyder RT 2019 Operator'S Manual Download Page 17

Page: 17 / 187

PRIMARY CONTROLS

219001827-006_i

1. Parking brake button

NOTE:

To apply or release the parking

brake, the ignition key must be turned
ON.

NOTE:

The battery voltage must be

at 11 V minimum to activate the park-
ing brake. If voltage is below 11 V, the
parking brake indicator lamp will turn
ON and the cluster will display a park-
ing brake failure message.

Applying Parking Brake

With the vehicle stopped, press button
to apply the parking brake. The brake
indicator lamp will flash.

219001827-006_i

1. Press button

NOTE:

The parking brake cannot be

activated when the vehicle is above
10 km/h (6 MPH).

Check that the parking brake is fully
engaged. Rock the vehicle back and
forth.

Releasing Parking Brake

To release parking brake, press button
and make sure brake indicator lamp
turns OFF.

219001827-006_i

1. Press button

_______________

Summary of Contents for Spyder RT 2019




























































































































































































Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands

Can-Am Spyder RT 2019, Operator'S Manual

Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands