Can-Am Spyder RT 2019 Operator'S Manual Download Page 136

Page: 136 / 187

HOW TO REPLACE FUSES AND LIGHTS

Fuses

If any electrical accessories stop work-
ing on the vehicle, check for blown
fuses and replace if necessary.

If an electrical failure still occurs, have
the vehicle serviced by an authorized
Can-Am On-Road dealer.

Fuse Locations

Fuses are located in the front storage
compartment.

To access the fuses, open the front
storage compartment.

rmo2010-001-044

FRONT STORAGE COMPARTMENT OPENED

Open the access cover.

Push down on the fuse service covers
and pull the covers off.

rmo2013-003-011_a

INSIDE FRONT STORAGE COMPARTMENT

1. Left fuse service cover
2. Right fuse service cover

Push down on the tabs and carefully re-
move the fuse box covers.

rmo2013-005-003_a

1. Tabs
2. Fuse box cover

Fuse Description

rmo2014-005-023_a

FUSES - LEFT FUSE BOX

NOTE:

Refer to decal located be-

tween both fuse boxes for correct
identification

NOTE:

Fuse boxes may differ be-

tween models.

Left Fuse Box

FUSE

NO.

DESCRIPTION

RATING

Cluster / DLC

15 A

Wake-up ECM / VCM/ MSR
and D.E.S.S. /SAS / YRS / PRS

10 A

Alternator

10 A

134

______________

Summary of Contents for Spyder RT 2019




























































































































































































Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands

Can-Am Spyder RT 2019, Operator'S Manual

Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands