Can-Am Spyder RT 2019, Operator'S Manual

Page: 25 / 187

SECONDARY CONTROLS
219001827-006_j
TYPICAL
1. ECC
The ECC is a multifunction switch, it
allows the control of numerous func-
tions of the multifunction gauge.
NOTE: Inputs given to the ECC may be
halted for a short delay as the vehicle
electronic modules prioritize vehicle
main functions. This should not be
considered a malfunction.
219001827-007_a
ECC AND PARKING BRAKE BUTTONS
1. MODE button: activates or deactivates
ECO mode
2. PARKING BRAKE button: activates or
deactivates the PARKING BRAKE
3. JOYSTICK button: Used to
navigate through menus by
going up / down / left / right.
Quick press then release: Enter
function.
WARNING
Using the ECC while driving can
distract the driver from operating
the vehicle. Always use buttons
with caution and always keep your
eyes on the road.
Audio Control
To turn the radio ON, push the JOY-
STICK UP. To close the radio, push the
JOYSTICK DOWN when the volume is
at its lowest setting.
When in the home screen, pushing the
JOYSTICK UP or DOWN will increase
or decrease the audio volume.
NOTE: .
To enable the audio automatic volume
level control, go to:
– Audio
– Configuration
– Auto vol CTRL
Push the JOYSTICK DOWN and hold
it more than one second for the audio
volume to mute.
From the mute setting, pushing the UP
button will reset the audio volume to its
last setting.
12) BRP Connect Button
The BRP Connect button is located on
the left handlebar housing facing the
clutch lever.
219001827-008_a
1. PTT button
The BRP Connect button is used for
quick access to BRP Connect. Each
click will swap between apps view and
functions view of the multifunction
gauge.
_______________
23