Can-Am Spyder RT 2019, Operator'S Manual

Page: 22 / 187

SECONDARY CONTROLS
rmo2010-001-031_f
CRUISE CONTROL PREVIOUSLY SET
1. Push down button to reduce the speed
setting
Cancelling the Cruise Control
Any of the following event will cancel
the cruise control.
– Pressing the brake pedal.
– Gear change.
– Any vehicle stability system inter-
vention.
Resuming the Cruise Control
If the cruise control was cancelled and
the cruise control switch is still at the
ON position, the cruise control oper-
ation can be resumed by pushing the
cruise control button up. The cruise
control will then recover the previous
set speed.
rmo2010-001-031_i
CRUISE CONTROL PREVIOUSLY
CANCELLED
1. Push up button to RESUME
NOTE: The cruise control status will
show CRUISE SET in the digital dis-
play.
Stopping the Cruise Control
To completely stop the cruise control
operation, slide the cruise control but-
ton to the left.
rmo2010-001-031_h
1. Slide button to OFF
NOTE: The CRUISE ON status will dis-
appear in the digital display.
6) Headlight Switch
Headlights
The switch is near the left handgrip.
219001827-006_a
TYPICAL
1. Headlight switch
The switch is used to select high or low
beam for the headlight. The headlights
automatically turn on when the engine
reaches 800 RPM and turn off after ap-
proximately 20 seconds when engine
has been stopped.
20
______________