Can-Am Spyder RT 2019, Operator'S Manual

Page: 124 / 187

MAINTENANCE PROCEDURES
D
1
A
B
C
rmo2015-003-131_a
TYPICAL HEADLIGHT REFLECTION ON
SURFACE TEST (SINGLE HEADLIGHT)
1. Top line
High Beam
NOTE: As the low beam and high
beam are separate units, this verifi-
cation is valid for either left-hand or
right-hand traffic regulations.
1. Follow steps 1 to 4 of the low beam
verification procedure.
2. Select High beam.
Beam aiming is correct when the focus
point (brightest spot) of the headlight
reflection is between lines A and B.
1
2
B A
rbl2015-005-001_a
TYPICAL HEADLIGHT REFLECTION ON
SURFACE TEST (BOTH HEADLIGHTS)
1. Ground
2. Focus point
Headlights Vertical Aiming
Adjustment
1. Remove both middle side panels.
Refer to BODY PANELS in EQUIP-
MENT .
North American Models
To adjust headlight beam, turn the HB
V
adjustment knob. Adjust both head-
lights evenly.
rbl2015-005-003_a
1. HB
V
adjustment knob
European and Australian Models
2. To adjust headlight beam, turn the
appropriate adjustment knob. Ad-
just evenly on both sides.
rbl2015-005-004_a
LH SIDE SHOWN (EUROPEAN AND
AUSTRALIAN MODELS)
1. High beam adjustment knob (HB
V
)
2. Low beam adjustment knob (LB)
Japanese Models
To adjust headlight beam, turn the ap-
plicable adjustment knob. Adjust both
headlights evenly.
122
______________