Can-Am Spyder RT 2019, Operator'S Manual

Page: 52 / 187

BASIC PROCEDURES
NOTE: When adjusting the pressure,
do not put your weight on the vehicle
and do not load cargo in the storage
compartment.
The air spring is connected directly to
an air hose with a schrader valve lo-
cated under the seat.
rmo2016-006-007_b
1. Schrader valve
To change the air pressure, proceed
the same way as for setting the pres-
sure in a tire.
When finished, ensure to reinstall cap
on the valve.
ACS Rear Suspension Adjustment
(with Automatic Adjustment)
Adjustment Guidelines
The rear suspension is calibrated for a
general riding and will adjust automati-
cally, using an integrated compressor,
while riding to maintain this preset
when the road conditions change or if
the vehicle load changes (adding a pas-
senger, riding with more cargo etc.).
NOTE: It is normal to hear pressure re-
lease or the air compressor operating
while engine is running. It indicates
the suspension is self-adjusting.
Using the Audio in Jack
An audio input jack is provided in the
front storage compartment.
219001827-013_a
1. Audio in jack
2. USB jack
An audio player such as a CD player,
iPod mobile digital device or an MP3
player can be connected in this jack to
be played through the audio system.
The iPod mobile digital device can be
partially controlled through the ECC.
The front USB port must be used to
run the BRP Connect app. Refer to
GAUGE
section for complete informa-
tion.
NOTE: An adapter (optional on some
models) is required to connect the au-
dio player to the vehicle audio jack.
The USB port located inside the top
case (on applicable models) is only
used to charge a smartphone. No data
is transferred through the rear USB
port.
219001827-012_a
1. USB port in rear top case
50
______________