Can-Am Spyder RT 2019, Operator'S Manual

Page: 103 / 187

PRE-RIDE CHECKLIST
ITEM PROCEDURE
GEARSHIFT
SELECTOR Be sure gearshift selector operates normally in both directions
and returns to center when released.
PASSENGER
FOOTREST
HEIGHT
ADJUSTMENT
Be sure the passenger is comfortable with the footrest height.
Adjust as necessary.
WEIGHT
Ensure that total load on the vehicle (including operator,
passenger, cargo and added accessories) does not exceed
recommended load as indicate in the
TECHNICAL SPECIFICATIONS
section.
TRAILER
If a trailer is towed, be sure its cargo is properly loaded and
secured, the covers are latched, the trailer and safety cables are
properly latched to vehicle hitch and all the trailer lights work and
reflectors are clean. Check trailer tire condition and pressure.
RADIATOR FAN
GRILLS
Remove any debris from the grills. Do not clean with a pressure
washer because it can damage the radiator fins. Clean only with
compressed air.
Turn Ignition Key to the ON Position:
ITEM PROCEDURE
MULTIFUNCTION
GAUGE
Check the gauges, indicators, messages and the fuel level
LIGHTS
Check operation of headlights, taillight, brake light, turn signals
and hazard warning lights.
HORN Check operation.
STEERING Start engine and verify that steering operates freely.
ENGINE STOP
SWITCH
Check that the engine stop switch is working properly.
PARKING BRAKE
Start engine, release parking brake and ensure brake indicator
lamp is off on the multifunction gauge.
BRAKE Drive a short distance forward slowly then apply brake to test.
SAFETY CARD Always lock the safety card back into position.
______________
101