Can-Am Spyder RT 2019, Operator'S Manual

Page: 19 / 187

SECONDARY CONTROLS
1) Ignition Switch
rmo2008-001-002_a
IGNITION SWITCH
1. OFF
2. ON
3. Front storage compartment opening
4. Seat opening/fuel tank access
5. Steering/glove box lock position
The ignition switch is located in the
center of the handlebar. It controls:
– Engine ignition
– Seat opening mechanism to access:
• Fuel tank cap
• Brake fluid reservoirs
– Front storage compartment open-
ing mechanism to access:
• Operator's guide
• Fuses
• Battery terminals.
– Steering/glove box lock mecha-
nism.
NOTICE
If the key does not turn
easily, do not force it. Pull it out and
reinsert.
WARNING
If you turn the ignition switch to
OFF, it shuts off the engine and all
the electrical systems including
the VSS and DPS. If you do this
while the vehicle is moving, you
could lose control and crash.
Two keys are provided with your vehi-
cle. Each key contains a transponder
chip specifically pre-programmed that
is read via radio frequency by the im-
mobilizer system to allow starting the
engine. The keys do not contain bat-
teries. Do not take the key apart. If the
immobilizer system cannot read the
key, the engine will not start. For the
conditions that can lead to the immobi-
lizer system failing to read the key, re-
fer to the
DIAGNOSTIC GUIDELINES
.
Store the spare key in a safe place be-
cause you
must have your spare key
to have another one made by an autho-
rized Can-Am On-Road dealer.
Ignition Function
OFF
The key can be inserted or removed in
this position.
In the OFF position, the electrical sys-
tem of the vehicle is disabled.
The engine is shut down by turning the
ignition switch to the OFF position.
ON
When the key is turned to this position,
the electrical system of the vehicle is
activated.
The gauge should wake-up.
The vehicle lights are turned on.
The engine can be started.
2) Engine Start Button
The engine start button is near the right
handgrip.
rmo2010-001-031_a
1. Engine start button
When depressed and held, it starts the
engine.
_______________
17