Can-Am Spyder RT 2019, Operator'S Manual

Page: 16 / 187

PRIMARY CONTROLS
When the gearshift selector is re-
leased, the mechanism resets for the
next shift UP or DOWN.
If operator does not downshift when
slowing down and engine RPM drops
below a threshold value, the gearbox
will automatically downshift to the
next available gear.
If the engine is started with gearbox in
gear, it will automatically shift to neu-
tral position.
4) Brake Pedal
The brake pedal is in front of the right
footrest. Press it down to operate.
This pedal brakes all three wheels.
Base Model
rmo2010-001-037_a
1. Brake pedal
2. Footrest
NOTE: When riding, make sure not
to lean your foot on brake pedal. Oth-
erwise, the engine management will
activate the limp home mode to pro-
tect the braking system.
RT Limited Models
rmo2013-005-015_a
NORMAL CONDITION
1. Brake pedal
2. Floorboard
A mechanism allows the floorboard to
lower if the pedal needs to be pressed
more than normal. If that occurs, push
on the rear portion of the floorboard un-
til it clicks and test the braking system.
rmo2013-005-016_a
LOWERED FLOORBOARD
1. Floorboard
If this condition persists or if you find
any braking system problems, refer to
an authorized Can-Am On-Road dealer.
5) Parking Brake Button
The parking brake button is located on
the LH grip. It allows to engage or re-
lease the electric parking brake.
, there will be a 20 second beep sound
when stopping the engine while the
parking brake is not engaged.
14
______________