Can-Am Spyder RT 2019 Operator'S Manual Download Page 39

Page: 39 / 187

EQUIPMENT

Front Storage
Compartment

Opening the Front Storage
Compartment

1. Insert key in ignition switch.

Push

and turn the key 1/4 turn coun-

terclockwise to the front storage
compartment position and hold
while lifting cover.

rmo2008-001-070_a

KEY POSITION TO OPEN FRONT STORAGE
COMPARTMENT

1. Push key
2. Turn key 1/4 turn

rmo2010-001-044

OPENED

Seat

The operator seat is equipped with a
provision to install the operator seat
backrest (available in option).

rmo2014-005-013_a

1. Backrest access cover

NOTE:

When backrest is not installed,

make sure the five tabs of the access
cover are properly engaged.

Opening the Seat

1. Insert key in ignition switch.

2. Push and turn the key 1/4 turn clock-

wise to the seat opening position
and hold while lifting seat.

rmo2008-001-071_a

KEY POSITION TO OPEN SEAT

1. Push key
2. Turn key 1/4 turn

NOTICE

Do not force the seat past

the maximum opening angle or it
may break.

_______________

Summary of Contents for Spyder RT 2019




























































































































































































Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands

Can-Am Spyder RT 2019, Operator'S Manual

Search results

Summary of Contents for Spyder RT 2019

Reviews:

Related manuals for Spyder RT 2019

Brands by name

Popular brands