92
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
Installing a Heat Exchanger Door
The cabinet uses doors with integrated heat exchangers to cool equipment inside the cabinet.
Heat exchanger doors can be installed in the field. Front and rear heat exchanger doors on
bay 1 are always required to cool C7 shelves 1 and 2. An additional front heat exchanger door
(on bay 2) is required when the cabinet is configured with a third C7 shelf. An additional rear
heat exchanger door (on bay 2) is required when the cabinet is configured with a fourth C7
shelf and/or third party equipment.
Installing a heat exchanger door may become necessary if:
The cabinet cooling capacity must be increased to support the addition of a C7 shelf or
third party equipment (where a factory-installed "blank" rear door must be replaced by an
integrated heat exchanger door).
An existing door becomes damaged or a heat exchanger fails or becomes damaged.
To install a heat exchanger door
1.
Remove the existing door that is to be replaced. See
Removing a Cabinet Door
for instructions.
2.
Install the new heat exchanger door on the vacant door frame. See
Installing a Cabinet Door
) for instructions.
