88
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
Installing an AC Meter
You can mount a commercial AC power meter directly to the exterior of the cabinet if
required. The suggested meter mounting location is on the front of the cabinet above the
generator connector housing. To install a meter in this location, you must cut a hole in the
cabinet wall. For cabinets not equipped with a generator connector, you can remove the plate
covering the connector housing and install the AC meter in that location.
After installing an AC power meter, be sure to thoroughly seal the opening. For AC wiring
information, refer to the AC wiring diagram on the inside door of the splice compartment.
DANGER!
High voltage may be present. Only a qualified electrician should
install an AC meter. Follow NEC and local codes when handling power
systems.
The figure below shows the suggested mounting location for a single position, 4-terminal,
ring-type outdoor AC power meter:
