83
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
5.
Apply the appropriately-numbered slot identification labels over the protection block's
dead pair positions 25 and 50.
6.
On the mounting frame, turn the two knobs counter-clockwise (to the open position),
then pull the frame forward to access the area behind the protection blocks.
7.
Route the two RJ-21 interface cables into the equipment chamber (through the holes in
the back wall of the compartment).
8.
Secure the protection block interface cables to the rack or towel bars with cable ties as
needed.
