43
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
Operating Cabinet Doors
Cabinet Doors
The cabinet has hinged front, rear, and side doors, each with a flush, tamper-proof handle
equipped with a telco hex-pin lock and padlock hasp for security. Open and close the doors
using a Calix-supplied telco hex key.
Each door is equipped with an alarm switch that monitors the position of the door. When a
door opens on an in-service cabinet is opened, an intrusion alarm reports through the
equipment. Pull the switch plunger to disable the alarm reporting while you are working on
the cabinet. The alarm switch is located at the upper corner of the door frame.
To open a cabinet door
1.
Insert the telco hex key into the hex-pin lock on the door handle.
2.
Turn the key counter-clockwise to disengage the door handle from the handle housing.
Note:
When disengaged, the door handle pops forward as shown.
3.
Lift up on the handle to disengage the door latch.
4.
Swing the door open until the wind latch engages to brace the door open.
5.
When opening a door on a powered cabinet, pull the plunger on the alarm switch to
disable reporting of the intrusion alarm.
Note:
Do not rotate the switch plunger. Rotating the plunger may damage the switch.
