72
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2001-2008 Calix. All Rights Reserved.
ALERT!
Check all connections carefully to verify correct wiring polarities.
7.
Install the temperature compensation cable lug onto the negative (-) terminal post of
String 1.
8.
Reconnect the six pairs of battery power cables (Anderson connectors) to the power
supply leads.
9.
(Optional) If you are using the Zone 4 seismic protection kit option, install the front
seismic brackets around the installed batteries. See Installing a Seismic Protection Kit for
instructions.
10.
Replace the front and rear battery compartment doors. See
Operating Cabinet Doors
(on
) for instructions.
