BYD TANG EV 2021, Owner'S Manual

Page: 191 / 218

190
4 Power button;
5 Sealant inlet cover.
WARNING!
•
Park the vehicle in a flat and safe
place when inflating a tyre.
•
Do not disassemble or modify the
inflator pump.
CAUTION!
• The inflator pump only works with
a 12V DC power supply. Do not use
other power supplies.
•
The inflator pump should not work
continuously for over 10 minutes.
•
Be sure to keep all water and dust
away when using the inflator pump.
Inflation method
1. Park the vehicle in a flat and safe place,
and remove the tyre valve cap.
2. Screw the inflator pump connector onto
the tyre valve. A slight air leakage sound
will be heard from the valve, indicating
that the air is circulated. Continue
screwing until there is no air leakage
sound.
3. Plug the power plug into the on-board
power supply port.
•
There is a power supply port in
the boot and another in the centre
console cubby.
4. Start the vehicle.
5. Power the inflator pump on and start
inflating.
6. Observe the pressure changes shown
on the pressure gauge. Power the
inflator pump off when the required air
pressure is reached (refer to the Vehicle
Information - Specifications - Wheels
and Tyres section).
7. Unscrew the inflator pump connector
and screw the tyre valve cap back on.
8. Unplug the inflator pump power plug
and return the inflator pump to the
toolkit.