BYD L3 AUTO Owner'S Manual Download Page 90

Page: 90 / 202

BYD L3

AUTO Owner’s Manual

1-82 Automobile Multimedia System

Discs with special shapes

Transparent and translucent discs

Discs of poor quality

Discs with labels

NOTICE

Please play legal discs. Do not
use special-shape, transparent,
translucent,

poor-quality

labeled  discs  as  shown  above;
otherwise,  the  CD  player  may  be
damaged  or  the  disc  cannot  be
played.



CD discs should be loaded and

unloaded carefully. More care should
be taken for inserting a disc into the
CD player slot. Hold edge of the disc
and do not twist it. Do not leave your
fingerprints on the CD disc, especially
the data storage surface.

Right Wrong

Summary of Contents for L3 AUTO











































































































































































































Search results

Summary of Contents for L3 AUTO

Reviews:

Related manuals for L3 AUTO

Brands by name

Popular brands

BYD L3 AUTO, Owner'S Manual

Search results

Summary of Contents for L3 AUTO

Reviews:

Related manuals for L3 AUTO

Brands by name

Popular brands