BYD L3 AUTO, Owner'S Manual

Page: 130 / 202

BYD L3
AUTO Owner’s Manual
3-2 Starting and Driving
Before Starting Engine
1.
Check the environment around the
car before getting in.
2.
Adjust seat position, seatback
angle, seat height, head protection
device height, steering wheel
angle and height.
3.
Adjust interior and exterior
rear-view mirror.
4.
Lock up all doors.
5. Fasten seat belts.
Once you set the anti-theft function by
pressing ―LOCK‖ on the wireless
remote control, you must press
―UNLOCK‖ to cancel it before driving,
or you cannot start the car.
How to Start Engine
(a) Before Staring Engine
MT:
1.
Check parking brake.
2.
Shut down all unwanted lights and
electrical devices.
3.
Shift gear shift lever to neutral
gear.
4.
Step clutch pedal to the bottom
and maintain until the car moves.
5. Anti-theft function will be disabled.
CVT:
1. Apply parking brake firmly.
2. Shut down all unwanted lights and
electrical devices.
3. Shift gear shift lever to P gear. If
you need to restart engine in
driving, please shift gear shift lever
to N; when the lever is on any
other gears, starting protection
device will prohibit starter running.
4. Step brake pedal to the bottom
and maintain until the car moves.
(b) Start Engine
Make sure procedure in ― (a) Before
Staring Engine‖ is performed before
starting engine.
Normal Starting
Multi-point fuel injection system in the
engine
automatically controls
appropriate mixing of air / fuel for
starting. You can perform cold starting
or hot starting in the following
procedure:
Turn ignition switch to START to start
the engine.
The engine can warm up through
travel rather than running idle. Run
the engine stably for preheating until
the engine coolant temperature rises
up to normal range.
If Engine Stalls
Restart as per normal starting
procedure.
When Engine Cannot Start
Refer to ―
When Engine Cannot Start
‖