BYD L3 AUTO Owner'S Manual Download Page 35

Page: 35 / 202

BYD L3

AUTO Owner’s Manual

Keys and car door

1-27

1. To open the fuel filler door,

pull the lever up.

When refueling, turn off the
engine.

CAUTION

●

While refueling, do not smoke,
avoiding the sparks or the
flame that could lead to fire.

●

When opening the cap, do not
remove the cap quickly. Upon
hot weather, fuel under
pressure could cause injury by
spraying out of the filler neck if
the cap is suddenly removed.

2. To remove the fuel tank cap,

turn the cap slowly
anticlockwise, and then
pause slightly before
removing it. After removing
the cap, hang it on the cap
hanger.

It is normal to hear a slight
swoosh when the cap is opened.
While installing, turn the cap
clockwise till you hear a click.

CAUTION

●

Make sure the cap is
tightened securely to prevent
fuel spillage in the event of an
accident.

●

Use only a genuine BYD
AUTO fuel tank cap for
replacement. It is designed to
regulate fuel tank pressure.

Start Engine

Before Starting Engine

1. Check the environment around

the car before getting in.

2. Adjust seat position, seatback

angle, seat cushion height, head
protection device height, steering
wheel angle and height.

3. Adjust

interior

and

exterior

rear-view mirror.

4. Make sure all doors are closed.
5. Fasten seat belts.

How to Start Engine

(a) Before Staring Engine

Summary of Contents for L3 AUTO











































































































































































































Search results

Summary of Contents for L3 AUTO

Reviews:

Related manuals for L3 AUTO

Brands by name

Popular brands

BYD L3 AUTO, Owner'S Manual

Search results

Summary of Contents for L3 AUTO

Reviews:

Related manuals for L3 AUTO

Brands by name

Popular brands