BYD L3 AUTO, Owner'S Manual

Page: 70 / 202

BYD L3
AUTO Owner’s Manual
1-62 Instruments and Maintenance Indicators
Left Information Display

Fuel Gauge
When power supply is at ON, this
gauge
indicates remaining fuel
amount in the fuel tank.
Almost Full
– all eight grids are
lighted.
Almost Empty
– the last grid is
flashing.
Generally the fuel shall be more than
1/4 full.
In braking, accelerating and turning,
the indicator may flash quickly, which
is caused by shaking fuel in the tank.
When the fuel level is near to ―E‖ mark
with the information screen displaying
―Please refill fuel‖, you shall add fuel
as soon as possible.
On slope road or in turning, the
shaking fuel in the tank may cause
the fuel indicator flashing or ―Please
refill fuel‖ displayed on information
screen before the normal refilling
time.

Engine Cooling Fluid
Temperature Gauge
When power supply is at ON, this
gauge indicates the temperature of
engine cooling fluid. The engine
temperature varies with climate and
engine load.
If the main warning light is on with
―Cooling Fluid Overheated‖ displayed
on the right information screen, it
means the engine cooling fluid is
overheated. When the engine is
overheated, you shall stop the car to
cool down the engine.
The engine may get overheated in the
following cases:
● Driving uphill in hot days;
● When the car is stopped frequently
in driving, the AC device is turned on
with the engine running in idle state
for a long time.
● When the care is used to tow a
trailer.
NOTE
◆
Do not remove the thermostat
in the engine cooling system,
otherwise the engine may run
abnormally.