BYD L3 AUTO Owner'S Manual Download Page 32

Page: 32 / 202

BYD L3

AUTO Owner’s Manual

1-24

Keys and car door

Luggage compartment lid

open

the

luggage

compartment

lid

from

the

outside, insert the master key
and turn it clockwise.

See

―Luggage

storage

precautions‖ in Section 2 for
precautions

when

luggage.

To

the

luggage

compartment lid, lower it and
press it. Then, try to pull upward

to make sure it is really closed.

CAUTION

Keep the luggage compartment
lid closed while driving. This not
only keeps the luggage from
being thrown out but also
prevents exhaust gases from
entering the vehicle.

Luggage component inner
control lever

Pull the lever up, and the
luggage component lock will be

opened.

Engine hood

To open the engine hood:
Pull the hood lock release lever
and the hood will spring up
slightly.

Summary of Contents for L3 AUTO











































































































































































































Search results

Summary of Contents for L3 AUTO

Reviews:

Related manuals for L3 AUTO

Brands by name

Popular brands

BYD L3 AUTO, Owner'S Manual

Search results

Summary of Contents for L3 AUTO

Reviews:

Related manuals for L3 AUTO

Brands by name

Popular brands