BYD L3 AUTO, Owner'S Manual

Page: 183 / 202

BYD L3
AUTO Owner’s Manual
Self-maintenance 7-17
Replace Wheels
When to Replace Wheels
When the wheel has damage such as
bending, crack or severe corrosion, it
shall be replaced.
If damaged wheel is not replaced
timely, the tire may detach from the
wheel or the car may lose control.
Choose Wheels
Only replace the wheel installed on
the car with a wheel with the same
load capacity, diameter, rim width and
offset.
BYD service station can replace
wheels correctly.
Wheels with different dimensions and
structure may have serious effect on
operability, service life of wheels and
bearings, cooling of brake, calibration
of speedometer and odometer, brake
performance, headlight alignment,
bumper height, ground clearance and
clearance between car body/chassis
and tire /tire chain.
Do not replace the wheel on BYD L3
with a used wheel, which may have
undergone treatment or long travel
mileage, getting the car into trouble
without prior warning. Do not use a
wheel which is repaired after bending,
as it may have structural damage. Do
not use inner tube intended for
tubeless tire on an air-leaking wheel.
TIPS
Do not use a wheel with
specifications other than that
recommended
by the
manufacturer, or the car may lose
control in driving, which may
result in severe injury or death.
Precautions on Aluminum Wheel
● For a car with aluminum wheels, the
nuts on the wheels shall be check
after the first 1,600 km travel to
make sure they remains tight.
● After tires are rotated, repaired or
replaced, the nuts on the wheels
shall be check after the first 1,600
km travel to make sure they
remains tight.
● Do not damage the wheels when
using tire chain.
● Only use BYD nuts and wrench
intended for aluminum wheels.
● When adjusting wheel balance
using tire chain, only use BYD
counter balance, plastic hammer or
rubber hammer.
● As with all autos, aluminum wheels
on BYD L3 shall be checked
regularly, and replaced if any
damage.