BYD L3 AUTO, Owner'S Manual

Page: 98 / 202

BYD L3
AUTO Owner’s Manual
1-90 Air Conditioning System
5. Turn switch to
,
the airflow
mainly flow to windshield and
windows.
Set air-inlet mode to external recycle.
Press the A/C button to turn on
the air conditions, wash the
windshield and windows rapidly.
Internal & External Recycle Button
Button operations to select the source
of air flow.
1. Internal recycle
- to recycle the air
in the car.
2. External recycle
– to absorb the
air outside into the system.
When you press the internal and
external recycle button, the indicator
(green) is on and the air-inlet mode is
internal recycle; press the button
again, the indicator is off and the
air-inlet mode is external recycle.
“A/C” Button
To start the air-conditioning system,
first turn the speed-regulating knob of
blower (not gear 0), and then press
―A/C‖ button. Then, the indicator
(green) of button is on. To turn off the
air-conditioning system, press the
button again (then blowing natural
wind) or turn the speed-regulating
knob of blower to gear 0.
Operation tips
●To quickly cool the car exposed in
the hot sun, just drive for minutes
with windows opened.
●Confirm that the air suction grid in
the front of windscreen is not
blocked (such as leaves or
snow).
● In wet weather, do not let cooling
air blow to the windscreen. Due
to
temperature difference
between the outside and inside
of windscreen, the windscreen
will fog over.
● You must keep it clean and open
under the front seat so as to
make the air fully recycled in the
car.
● In cold weather, you must set the
rotating speed of blower to a high
speed for one minute so as to
clear the snow or moisture in the
air inlet channel. By doing so,
you can reduce fogging on the
windows.
● When driving on the dirty road,