BYD L3 AUTO Owner'S Manual Download Page 24 | Manualshive

Page: 24 / 202

background image

BYD L3

AUTO Owner’s Manual

1-16

Keys and car door

Access Function

Starting Function

Access and Starting Function

Intelligent key (electronic or card-type)
can unlock/lock doors and start
engine.

Access Function

– unlock/lock doors.

+ For detailed information, please see
―

Front Door

‖ in this Chapter.

Starting function

– when intelligent

key  is  in  the  car,  it  can  switch  power
supply  mode  and  start  engine.  For
detailed  information,  please  see
―

Engine Starting

‖ in this Chapter.

Steering Lock Function

When the doors are locked through
wireless

remote

control

or

microswitch,  the  steering  wheel  will
be locked.

When  the  key  is  in  the  car,  if  you
press down ―Engine Start Stop‖ switch,
the  steering  lock  will  be  released
automatically. If green indicator on the
―ENGINE  START  STOP‖  switch
flashes, it means steering lock cannot

be released. To release it, press down
―Engine Start Stop‖ switch and shake
the  steering  wheel  slightly.  If  the
green  indicator  still  flashes,  it  means
the steering lock has fault and please
contact  BYD  service  station  for  help.
For details, please see ―Start Engine‖
in this Chapter.

Antenna Position

1

Antenna in carriage

2

Antenna out of carriage

«
...
22
23
24
25
26
...
»

Summary of Contents for L3 AUTO











































































































































































































Reviews:

No comments

Related manuals for L3 AUTO

Brand: GMC Pages: 140

Brand: Ranger design Pages: 6

ESCALADE - BROCHURE 2009

Brand: Cadillac Pages: 24

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 20

Reference Series

Brand: OEM Audio Pages: 29

Brand: Ultra-tow Pages: 14

Brand: Mercedes-Benz Pages: 121

Brand: Menabo Pages: 8

Brand: Camtree Pages: 5

Brand: Mobile Create Pages: 15

Brand: DEFA Pages: 7

Brand: Prorack Pages: 15

PERFECTVIEW CAM80AHD

Brand: Dometic Pages: 196

Brand: PullRite Pages: 10

Brand: Honda Pages: 208

Brand: WABCO Pages: 32

Brand: Volvo Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands