BYD ATTO 3 2022, Owner'S Manual

Page: 29 / 201

28
WARNING!
• Never use a rear-facing child seat
on the front passenger seat with the
airbag activated.
• Front-facing passengers (children or
adults) must never sit on the front
passenger seat with the passenger
airbag deactivated.
• When a forward facing child restraint
system is used on the front passenger
seat, make sure the seat is positioned
fully rearward away from the active
airbag.
• Before seating a child, ensure the
child restraint system is securely
installed and does not rotate or move
away from the seat.
• When using a child restraint system
always ensure: the anchorages are
not obstructed; the seat belt is in
the correct position; and the child
restraint system is securely installed.
• Failure to follow the advice given, or
to follow the instructions from the
child restraint system manufacturer,
can endanger life or lead to serious
personal injury.
CAUTION!
•Extension straps may be required
to connect the top tether to the
anchorage, if the top tether length is
insufficient.
• When installing a size class R3 child
restraint system, ensure the seat is fully
rearward before the installation.
• Where applicable to use a top tether
strap with the child restraint system,
ensure the strap is routed through the
hole in the headrest before attaching and
tensioning the strap to the anchorage
point at the base of the seat.
CAUTION!
•use images to demonstrate routing of
the top tether.
• For details about how to install the CRS
on the front passenger seat, see the
preceding description.
Securing a child seat using the seat belt Securing a child seat using the seat belt
• Only use child seats that are
recommended by BYD, are universally
approved, or are semi-universal and
where the vehicle model is included on
the child restraint manufacturer's vehicle
list.
• Installation options are shown in the
table below.