BYD ATTO 3 2022, Owner'S Manual

Page: 157 / 201

156
Ball pin and boot checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 24 months or 40,000 km,
and subsequent inspections every 24 months or 40,000 km;
where under harsh conditions, the initial inspection should be
performed at 3 months or 5,000 km, the second inspection at
12 months or 20,000 km, and subsequent inspections every
12 months or 20,000 km.
Front and rear suspension
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 24 months or 40,000 km,
and subsequent inspections every 24 months or 40,000 km;
where under harsh conditions, the initial inspection should be
performed at 3 months or 5,000 km, the second inspection at
12 months or 20,000 km, and subsequent inspections every
12 months or 20,000 km.
Tires and inflation
pressure (incl. TPMS)
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
Front and rear alignment
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 24 months or 40,000 km,
and subsequent inspections every 24 months or 40,000 km;
where under harsh conditions, the initial inspection should be
performed at 3 months or 5,000 km, the second inspection at
12 months or 20,000 km, and subsequent inspections every
12 months or 20,000 km.
Tire rotation
Check air pressure and tire condition at least once a month and
rotate every 10,000 km.
Door stop checkup
Remove the dust from the lever with a damp soft cloth, and
apply 0.3 to 0.8 g of grease to the lever, riveting joint and rotating
shaft. The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
Wheel bearings clearance
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 24 months or 40,000 km,
and subsequent inspections every 24 months or 40,000 km;
where under harsh conditions, the initial inspection should be
performed at 3 months or 5,000 km, the second inspection at
12 months or 20,000 km, and subsequent inspections every
12 months or 20,000 km.
Auxiliary tank refrigerant
level checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.