BYD ATTO 3 2022, Owner'S Manual

Page: 125 / 201

124
• When the vehicle goes into reverse,
the system automatically enables the
Reversing View.
• Never use other buttons under the
Reversing View screen, except for volume
and telephone related buttons.
• When the vehicle is out of reversing, the
screen restores.
Reversing View screen
• The two lines in the image are safety
lines for reversing.
• Red: about 0 m to 0.5 m away;
• Yellow: about 0.5 m to 1 m away;
• Green: about 1 m to 3 m away.
• The area shown varies with the vehicle's
direction and road conditions.
WARNING
• When the vehicle speed exceeds
10 km/h, the Park Assist system stops
working.
•
Make sure the sensors' working range
is clear of any object.
•
Do not rinse or apply steam to the
sensor area when washing the vehicle
to prevent sensor malfunction.
Parking Assist Power Switch
• Press the Reversing Radar switch* or tap
on Infotainment → Dipilot → Parking
Assist → Reversing Radar, to enable or
disable Parking Assist.
• When the ignition status is on OK, EPB
is released and Parking Assist is enabled
automatically.
• There is an alarm if obstacles are found
surrounding the vehicle when the
system is powered on. There is no alarm
when the vehicle is powered off.
Sensor Type
• When the sensor detects an obstacle, the
corresponding image will be displayed
on the Infotainment screen*, depending
on the location of the obstacle and its
distance from the vehicle.
• The sensor measures the distance
between the vehicle and the obstacle
when parking or moving the vehicle in
a row, and communicates the distance
information through the Infotainment
screen and the speaker. Be aware of the
surroundings for use of this system.
(1) Front left sensor*
(2) Front right sensor*