BYD ATTO 3 2022, Owner'S Manual

Page: 115 / 201

114
• The predictive emergency braking
system is triggered only when the doors
are closed and the seat belt is fastened.
In the following circumstances, It will fail
to work in the following cases:
• Any door is not closed or is opened
when the vehicle is moving.
• The seat belt is not fastened or it
is unfastened when the vehicle is
moving.
• Hard braking.
• Hard acceleration.
• Frequent switching between
accelerator and brake pedals.
• System performance may be reduced in
the following cases:
• Strong front bumper impact.
• Improperly inflated or worn out tires.
• Unqualified tires installed.
• Snow chains are installed.
• Small spare tire or tire repair kit is
used.
• In the following cases, go to a BYD
authorized dealer or service provider
for medium range radar professional
calibration:
• Removal of medium range radar or
multifunctional video controller.
• Toe-in and camber adjustment during
four-wheel alignment.
• Collision.
• The ACC system deteriorates or
becomes abnormal.
• Do not try to test the predictive
emergency braking system.
• The traffic sign recognition system
identifies speed limit signs on the road
through multifunctional video controller.
When the speed limit icon on the cluster
lights up, it means the vehicle speed
should be within range.
• This system supports intelligent speed
limit warning/intelligent speed limit
control function.
• Intelligent speed limit warning: a warning
is given when speed exceeds the detected
speed limit.
• Intelligent speed limit control: it
combines the adaptive cruise function
with the speed limit sign recognition
function. When activation conditions
for this function are met, the instrument
will display the message "SET-Activate
Intelligent Speed Limit Control". Then the
driver activates this function by toggle
the lever (2) downward, and the system
automatically requests to control the
target adaptive cruise speed within the
speed limit in a certain period of time.
• Tap on → Dipilot → Driving Assist
to enable or disable the traffic sign
recognition system. When the vehicle
starts, the system defaults to the
previous settings.
• When the system identifies a speed
limit sign, the speed limit icon identified
appears (such as ) on the cluster.
Traffic Sign Recognition
System*