BYD ATTO 3 2022, Owner'S Manual

Page: 40 / 201

39
03
DASHBO
ARD
Warning Light and Indicator
Description
Smart key system warning light
• If the key is not in the vehicle when the
power button is pressed, this warning
will light up for a few seconds, a beep
will be heard, and a "No key detected,
please check whether the key is in the
car" message will be displayed on the
cluster.
• If an electronic smart key matching the
vehicle is inside and the power button is
pressed, the warning does not light up
and the vehicle is powered on normally.
• If the warning light flashes when the
power button is pressed, the battery of
the smart key is low.
• If the key is not in the vehicle, the
instrument cluster prompts "The key is
not detected, please check whether the
key is in the car".
ABS warning light
• When the ignition switch is on OK, this
warning light goes on. If ABS is working
normally, this warning light goes off in a
few seconds. If ABS is faulty, the warning
lights up again until the fault is cleared.
• When the ABS warning light goes on (the
parking brake system warning light goes
off), ABS is not working, but the braking
system still works normally.
• When ABS is not working, wheels will be
locked in emergency braking or braking
in slippery roads.
• If any of the following cases occurs, it
means there is a fault in components
monitored by the warning light system.
In such case, contact a BYD authorized
dealer or service provider as soon as
possible.
• When the ignition switch is on OK,
this warning light does not go on or is
steady on.
• This warning light goes on while
driving.
REMINDER
•A warning light that lights up briefly
during operation does not indicate
that there is a problem.
•If the parking brake system warning
light and the ABS warnings light up
at the same time, immediately stop
the vehicle safely and contact a BYD
authorized dealer or service provider.
In this case, when the brake is applied,
not only will the anti-lock braking
system fail to work, but the car will
also become extremely unstable.
• If both the ABS warning light and braking
system warning lights go on after the
EPB is released, it indicates that the
Electronic Brake-Force Distribution
(EBD) system of the front and rear tires
has also failed.
Tire pressure warning light
• When the ignition switch is on OK, this
warning lights up. It goes off in a few
seconds if the tire pressure monitoring
system (TPMS) works normally. If the
system is faulty, this warning light goes
on again.
• When the tire pressure warning light is
on or flashing, the instrument cluster
displays "Please check the tire pressure
monitoring system", and the tire pressure
is displayed as "---" on the screen, it
indicates that the TPMS is faulty.
• When the TPMS displays "Signal
Abnormal", it indicates that the tire
pressure signal at the location of the
vehicle may be disturbed or the TPMS
module is damaged.