BYD ATTO 3 2022, Owner'S Manual

Page: 146 / 201

145
06
IN-CAR DEVICES
PM2.5 Detection Button
• Tap on the "PM2.5 detection" button to
activate and detect PM2.5 concentration
inside/outside in real-time, which will be
displayed in real time on the PAD.
• PM2.5 detection will stop if the button is
tapped on again.
Quick Purification Button
• This function can quickly reduce the
concentration of PM2.5 particles in the
air inside the compartment in a short
time.
• Tap on this button to activate and enable
the function; and tap on the button again
to exit.
In-vehicle PM2.5 Value and Level
Display
• It displays the PM2.5 value and level
inside the vehicle.
• The PM2.5 value detected by the on-
board Air Purification (PM2.5) detector
is the PM2.5 value in the air near the
vehicle carrying the device in a short
time, which should be different from
the daily or real-time PM2.5 value of the
air published by the state and relevant
government authorities.
Here is a reference of air quality grade:
Range of PM2.5
value
Air quality grade
0-35 Good
36-75 Moderate
76-115
Detrimental to
sensitive groups
116-150 Unhealthy
151-250 Very unhealthy
251-999 Hazardous
REMINDER
•The frequency of PM2.5 detection
should be reduced in the following
environments:
»
Sandstorms and other such
extremely harsh environments;
» Cold regions (ambient
temperature of <-20℃);
» High humidity environments
(relative humidity >90%);
»
Environments with a change
in temperature (prone to
condensation), such as driving in
from a cold environment to a high-
temperature indoor environment
or parking lot.
•Running maximum air flow speed
under internal circulation mode can
quickly reduce the concentration
of fine particles in the air inside the
vehicle.
Switching on A/C with
Cloud Service APP
• A/C ON: tap on the "A/C ON" button on
the BYD APP control interface, and tap
on the "Set temperature", "Duration" and
"Circulation mode" buttons for setting,
and enter the password to enable A/C
remotely.
• A/C OFF: tap on the "A/C OFF" button on
the BYD APP control interface, and enter
the password to disable A/C remotely.
• A/C schedule: tap on the "A/C schedule"
button on the BYD APP control interface,
and tap on the "Create Schedule"
button, and set time, temperature,
duration and circulation mode, and save
the settings.