BYD ATTO 3 2022, Owner'S Manual

Page: 156 / 201

155
MAINTENANCE
07
Maintenance Schedule
The vehicle maintenance is performed based on the mileage or months, whichever comes first.
Maintenance items Maintenance interval
Chassis fastening anchor
screws checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km, where
damaged parts should be replaced in time.
Brake pedal and EPB
switch checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 24 months or 40,000 km,
and subsequent inspections every 24 months or 40,000 km;
where under harsh conditions, the initial inspection should be
performed at 3 months or 5,000 km, the second inspection at
12 months or 20,000 km, and subsequent inspections every
12 months or 20,000 km.
Brake friction block and
disk checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 12 months or 20,000 km, and
subsequent inspections every 12 months or 20,000 km.
Brake piping and hoses
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 24 months or 40,000 km,
and subsequent inspections every 24 months or 40,000 km;
where under harsh conditions, the initial inspection should be
performed at 3 months or 5,000 km, the second inspection at
12 months or 20,000 km, and subsequent inspections every
12 months or 20,000 km.
Guide pin of brake caliper
assembly checkup
The initial inspection should be performed 12 months or
20,000 km, and subsequent inspections every 24 months or
40,000 km.
Steering wheel and lever
checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 24 months or 40,000 km,
and subsequent inspections every 24 months or 40,000 km;
where under harsh conditions, the initial inspection should be
performed at 3 months or 5,000 km, the second inspection at
12 months or 20,000 km, and subsequent inspections every
12 months or 20,000 km.
Drive shaft boot checkup
The initial inspection should be performed at 3 months or
5,000 km, the second inspection at 24 months or 40,000 km,
and subsequent inspections every 24 months or 40,000 km;
where under harsh conditions, the initial inspection should be
performed at 3 months or 5,000 km, the second inspection at
12 months or 20,000 km, and subsequent inspections every
12 months or 20,000 km.