BYD ATTO 3 2022, Owner'S Manual

Page: 107 / 201

106
CAUTION
•When the accelerator pedal is
pressed, shift to "P" gear or pull up
the EPB switch, the AVH mode will be
disabled and the vehicle will return to
AVH standby state. If the conditions
for AVH standby are not met, and the
auto park standby condition is also
not met, and the AVH state will also
be disabled.
Preconditions for AVH Stand-by
(all must be met)
• AVH is turned on and the white AVH
stand-by indicator is displayed on the
cluster.
• Seat belts are fastened and doors are
closed.
• The drive motor is started or ignition
status is on "OK".
• Intelligent Power Braking System and
Electrical Park Brake (EPB) systems are
normal.
CAUTION
•At power-on, the automatic parking
function is disabled by default.
It enters stand-by mode, and the
instrument panel shows the white
AVH stand-by status indicator light.
AVH Running Conditions (all
must be met)
• The AVH function is ready.
• In travel gear, the brake pedal is pressed
to stop the vehicle.
• The AVH function is enabled, brake
lights go on, and the AVH indicator
goes green.
• The AVH function will enter standby
after working for 10 minutes, with the
EPB switch automatically popping up.
CAUTION
•For AVH to be activated, the
conditions of the automatic parking
function must be met at the same
time.
•When the gear is shifted from D to R,
the system will enter moving mode,
and the AVH function will not be
activated. When the AVH button is
pressed or after the speed exceeds
10 km/h, the system will exit moving
mode.
Low Speed Moving Condition
• When the gear is shifted into "R", the
system enters moving mode, and AVH
goes into low speed moving mode.
When the vehicle reverses at low speed,
or gear is shifted into "R" or "D", AVH is
suppressed to improve vehicle motion.
• After moving the vehicle, push the AVH
switch to exit moving mode, which can
also be disabled if the vehicle speed
exceeds 10 km/h. Then the AVH function
can be activated normally.