BYD ATTO 3 2022, Owner'S Manual

Page: 69 / 201

68
Tap on → DiPilot → Driving Assist to
turn on HMA.
Activating HMA Activating HMA
• Rotate the knob of the light switch knob
to the position. When the vehicle
speed is above 35 km/h and the light
meets conditions, HMA is automatically
activated and switches between low and
high beam based on the current driving
environment.
REMINDER
•When HMA is activated, the high
beam assist indicator light on the
instrument panel will light up.
Deactivating HMA Deactivating HMA
• How to deactivate HMA:
•
Rotate the light switch knob to any
position except .
•
Tap on → DiPilot → Driving
Assist , or use the shortcut menu to
turn off HMA.
• Manually activate high beam.
Suppressing HMA Suppressing HMA
• HMA is suppressed in any of the
following cases:
•
The vehicle speed is below 35 km/h.
• The fog light or turning lights light up,
or the vehicle makes a sudden turn.
System Limitations System Limitations
• HMA may be unexpectedly activated, or
fail to activate in the following cases (in
such cases, drivers are advised to control
the lights manually):
• There are traffic participants (such
as pedestrians and bicycles) with
poor lighting, railways or waterways
nearby, or wild animals on the road.
•
The front windshield is dirty, covered
in mist, or blocked by stickers or
decorations.
•
There are strongly reflective objects
around, such as traffic signs on
highways, and water reflection on the
road surface.
CAUTION
•When the vehicle collision or sensors
have been reinstalled, contact a BYD
authorized dealer or service provider
to calibrate the sensors, so as to avoid
affecting system performance.
Adjust Headlight Height
When the low beam is on, tap on →
Vehicle Settings → Light @ ambient →
Adjust headlights on the center console
touchscreen to adjust the headlights
vertical beam angle.