BYD ATTO 3 2022, Owner'S Manual

Page: 33 / 201

32
Data Collection and
Processing
Data Collection and
Processing
• This section provides you with some
important information on how personal
data is collected and processed when
you use a BYD vehicle.
• For a more detailed overview on data
processing, data protection and data
subject rights, please read the current
version of the privacy policy for the
vehicle available at the BYD website.
Vehicle Data Processing
• Data is collected when the vehicle
is used, such as data collected or
transmitted by vehicle sensors or control
units, which is necessary for the safe
functioning of your vehicle.
• In some cases, the data is used to
support driving (driver assistance
systems) or to enable a specific comfort
or infotainment function.
• Personal data that is collected and
processed mainly include in-vehicle
data, remote-services-related data, and
other data, as further specified below.
In-Vehicle Data In-Vehicle Data
Operation data
• When the vehicle is used, various vehicle
status data (e.g. speed, battery level,
braking system) or the environment
(e.g. distance sensors, rain sensor,
temperature sensors) are collected and
processed.
• This data is not usually stored, but
there are control units, sensors or other
components installed in the vehicle
that record such data, for example to
record maintenance requirements, error
messages or other information.
• The in-vehicle data will only be stored
in the equipment in the vehicle but can
be read out via the legally required OBD
("On Board Diagnostics") interface, for
example by BYD authorised dealer or
service provider or other third parties.
• In case this access takes place during
vehicle maintenance, the information
can also be transmitted to BYD engineers
for quality assurance, product defect
reports or customer claim verification.
Remote-services-related data Remote-services-related data
Remote monitoring services
• This vehicle has remote monitoring
services.
• These include remote monitoring
services such as remote diagnosis and
Over-the-air (OTA) updates and upgrades
for security and safety purposes (subject
to owner's approval).
• These monitoring services serve the
following purposes: service provision
(remote support/diagnostics), product
development and security/public safety.
• Depending on the country and set-
up, various vehicle information can
be transmitted to BYD for the above
purposes, including vehicle location
information, vehicle status, such as
energy consumption, vehicle speed,
gear position, power mode, ESC status,
steering system status, battery status,
powertrain status and overall vehicle
performance status.