BYD ATTO 3 2022, Owner'S Manual

Page: 68 / 201

67
CONTROLLER OPER
ATIONS
04
Auto light off Auto light off
• Conditions for enabling the auto light off
function: when the light button on the
multifunctional switch is toggled to
" " or " " , the power supply is
switched from "Start" to "Stop" status,
and this function is enbaled.
• With auto light off enabled, when the
driver's door is closed, headlights and
small lights go off after 10 seconds.
• With auto light off enabled, when the
driver's door is opened, headlights and
small lights go on for 10 minutes.
• If the light status is changed when the
auto light off function is activated, the
lights will come on in the new status. If
the conditions for auto light off are still
met, this function will be activated again.
• Disabling of auto light off function: when
the vehicle is powered on, the auto light
off function will be disabled, and the
light knob can be operated normally.
• After the auto light off function turns
off the lights, the anti-theft mode will
be activated. If the anti-theft function is
deactivated, the light will turn on again.
If the driver's door is closed, the auto
light off function will turn off the lights
10 seconds later. But if the door is open,
it will turn off the light 10 minutes later.
Lighting delay Lighting delay
• When the vehicle is powered on, tap
on → Vehicle settings → Light @
ambient → Headlight after exit to
set the delay time.
• Go-home lighting delay:
•
Owners can set the go-home light
delay time on the touchscreen (10
seconds by default). After pulling the
light handle of the combination
switch to " ", " " or " ",
when the vehicle is powered off and
the doors are locked, the lights keep
on for 10 seconds (or the set time) to
provide a lighting source.
• Leave-home lighting delay:
• Owners can set the leave-home light
delay time on the touchscreen (10
seconds by default). After pulling the
light handle of the combination
switch to " ", " " or " ",
when the doors are unlocked to
approach the vehicle, the lights keep
on for 10 seconds (or the set time) to
provide a lighting source.
High Beam Assist (HMA)
• The HMA system uses a multi-function
video controller on the front windscreen
to determine current driving conditions
and, if necessary, automatically switch
between high/low beams.