BYD ATTO 3 2022 Owner'S Manual Download Page 189

Page: 189 / 201

188

CAUTION!

• If the vehicle being rescued cannot be

started after several attempts, contact

a BYD authorized dealer or service

provider.

• The rated battery voltage of the

rescue vehicle should be 12V for

starting with jumper cables.

When the Vehicle Needs

Supporting

If the vehicle is needed to be lifted or jacked

up, the lifting boom or the jack can only be

placed at the lifting points as shown in the

figure.
To ensure safety, pay attention to the

following tips before lifting or jacking up a

vehicle.

• Park the vehicle on the firm and flat

ground.

• Switch the vehicle power supply to

"OFF", and all occupants should leave

the vehicle.

• When jacking up the vehicle, wedge the

front wheels in the front or rear wheels

behind them to prevent sliding.

WARNING!

•

Do not place the lifting boom or the

jack on the power battery.

•

Ensure firmness when lifting or

jacking up the vehicle.

•

When jacking up the vehicle, do not

have any part of your body under the

vehicle.

Summary of Contents for ATTO 3 2022










































































































































































































Search results

Summary of Contents for ATTO 3 2022

Reviews:

Related manuals for ATTO 3 2022

Brands by name

Popular brands

BYD ATTO 3 2022, Owner'S Manual

Search results

Summary of Contents for ATTO 3 2022

Reviews:

Related manuals for ATTO 3 2022

Brands by name

Popular brands