BYD ATTO 3 2022, Owner'S Manual

Page: 124 / 201

123
USING AND DRIVING
05
• After the vehicle starts, the image
before last power-off is displayed
on the invisible panoramic screen.
Foreign bodies in the underbody
and surrounding blind areas may be
inconsistent with the actual ones. The
underbody image will be updated in real
time only after the vehicle has moved,
which must be driven beyond its length
for a complete update.
WARNING
•
This system uses wide-angle fisheye
cameras, so the object on the display
screen may appear somewhat
deformed in comparison with the
actual object.
• The panoramic view system is
only to be used for parking/driving
assistance. It is not safe to park or
drive the car relying only on this
system, because there are some blind
spots in front of and behind the car.
The surroundings of the car should
be observed in other ways during
the parking/driving process, so as to
avoid accidents.
• When the side mirrors are not
extended in place, do not use the
panoramic view system; and when
the panoramic view system is used
for parking/driving, ensure that all the
car doors are closed.
•
The distance to an object displayed
on the panoramic view screen may be
different from the distance perceived
subjectively, especially when the
object is closer to the vehicle; the
driver needs to judge the distance
between the vehicle and the object in
various ways.
WARNING
•
The cameras are mounted on the
front bumper, on the lower sides of
the left and right side mirrors and
above the rear license plate. Make
sure the cameras are unobstructed.
•
When washing the car body with a
high-pressure water gun, try to avoid
spraying directly on the cameras, so
as not to affect their performance. If
there is water or dust on the cameras,
it should be promptly wiped clean.
• Protect the cameras from any impact
to prevent damage or malfunction.
• If the infotainment system is not fully
activated after the vehicle is powered
on, and the panoramic view start
button or the reverse gear is operated,
the output on the panoramic view
screen will be delayed or the screen
will flash. This is a normal part of the
camera power-on process.
•
When moving the vehicle at low
speeds, as the transparent panoramic
function is affected by the speed
fluctuation or multiple stops and
brakes, there will be a misalignment
between the image of the bottom
of the vehicle and the image of the
outside of the vehicle.
Parking Assistance System
• When the vehicle is being parked, the
Parking Assistance system uses sensors
to detect obstacles and inform the driver
of the distance between the vehicle and
the obstacle through the Infotainment
screen* and the speaker alarm.
• Parking Assistance is a way to help
reverse the vehicle. Make sure to check
the vehicle rear and surroundings when
reversing.