BYD ATTO 3 2022, Owner'S Manual

Page: 57 / 201

56
WARNING
»
Make sure to remove any ice or
snow from the area before opening
the trunk, otherwise the lid may
close again.
» Do not manually interfere in lid
motion when it is opening or
closing.
» Be mindful of windy conditions
when opening or closing the trunk.
» The anti-pinch function may fail
to work if an object is caught right
before the trunk is fully closed.
» Opening or closing the trunk on
slopes is more difficult than on
level ground. The lid may start
closing before fully opening. Be
mindful of the possibility of the
lid to move on its own in such
conditions. Before loading or
unloading the trunk, make sure
the lid is fully open and secure.
» The anti-pinch function may fail
depending on object shape. Be
specially careful about hand and
fingers.
Locking/Unlocking with Center
Console Door Lock
Using the center console door lock to lock Using the center console door lock to lock
or unlock the vehicle or unlock the vehicle
For details, see "
Center Console Door
Lock " in this chapter.
Automatically locking and unlocking doors Automatically locking and unlocking doors
• When the function setting is enabled in
the PAD, the vehicle is in OK gear, and the
vehicle speed changes from ≤8 km/h to
>8 km/h, if all of the car doors are closed,
but any car door is not locked, it will
command electric locking of all four door
locks.
• Press the Start/Stop button, and change
the ignition switch from OK to OFF. Then,
all doors are locked automatically.
Locking and unlocking all doors Locking and unlocking all doors
concurrently concurrently
• If the vehicle does not enter the anti-
theft mode after it is locked, the center
console door lock back light goes on,
and off when the vehicle is unlocked.
• When the center console door lock is
pressed, all doors are locked, and any
attempt to open any door from the
outside fails. The interior handle must
be pulled twice to open a door.
Emergency Locking of All Doors
with Mechanical Key
When the center console lock system or the
smart key fails, the mechanical key can be
used for emergency locking or unlocking.
Locking
Locking
1. Remove the mechanical key from the
smart key.
2. The three doors other than the driver's
door can be locked by moving down
the slider with the mechanical key (as
shown) and closing the door.
3. After locking the three doors, open the
driver's door.