Buell XB 2010, Service Manual

Page: 370 / 714

4.3 AIR CLEANER ASSEMBLY
REMOVAL
1. Remove intake cover. See 2.38 INTAKE COVER .
2. See Figure 4-1 or Figure 4-2 . Remove fuel tank vent tube
(4) from fuel tank vent valve (5) and groove on top of air
cleaner cover (3).
NOTE
See Figure 4-3 or Figure 4-4 . For 1200 model motorcycles with
interactive exhaust systems see 6.16 INTERACTIVE EXHAUST
SYSTEM .
3. See Figure 4-1 . Unlatch six lock tabs (3) and remove air
cleaner cover from baseplate.
4. Remove the filter element from baseplate. Inspect and
replace if necessary.
5. See Figure 4-4 . Remove air cleaner baseplate.
a. Remove four fasteners (1) and raise baseplate (3).
b. Disconnect longer breather hose from baseplate (pull
out from bottom).
c. Disconnect shorter breather hose from PVC valve
located on top of rear cylinder.
d. Remove IAT sensor (6) from grommet on bottom of
baseplate.
e. Lift baseplate off of frame, carefully disengaging
baseplate from velocity stack sealing ring (5) on
velocity stack (4).
f. Remove baseplate from motorcycle.
3
4
2
1
sm00894
1. Cover, air cleaner
2. Fuel tank vent valve
3. Lock tab (6)
4. Fuel tank vent tube
Figure 4-1. Air Cleaner Cover (XB9)
1
2
3
5
4
sm00896
1. Cable, interactive exhaust
2. Harness, interactive exhaust
3. Cover, air cleaner
4. Fuel tank vent tube
5. Fuel tank vent valve
Figure 4-2. Air Cleaner Cover, Fuel Tank Vent Tube and
Fuel Tank Vent Valve (XB12R)
sm04587
Figure 4-3. Interactive Exhaust Actuator to be used with
Translucid Intake Cover (XB12)
HOME
4-4 2010 XB Service: Fuel System