Buell XB 2010, Service Manual

Page: 271 / 714

3.2 SPECIFICATIONS
GENERAL
NOTE
Service wear limits are given as a guideline for measuring
components that are not new. For measurement specifications
not given under SERVICE WEAR LIMITS, see NEW COMPON-
ENTS.
Table 3-1. General Engine Specifications
SPECIFICATION ITEM
2 cylinder, air cooled, four-stroke 45 degree V-twin Type
10:1 Compression ratio
88.9 mm 3.50 in. Bore (all models)
79.38 mm 3.125 in. Stroke (XB9SX)
96.82 mm 3.812 in. Stroke (XB12 models)
984cc 60.05 cu. in. Engine displacement (XB9SX)
1203cc 73.4 cu. in. Engine displacement (XB12 models)
2.37 liters 2.5 quarts Oil capacity (with filter change)
Table 3-2. Engine Ignition Specifications
SPECIFICATION ITEM
Sequential, non-waste spark Type
1050-1150 RPM Regular idle
12 mm Spark plug size
Harley-Davidson No. 10R12X Spark plug type
0.8890 mm 0.035 in. Spark plug gap
16-24 Nm 12-18 ft-lbs Spark plug torque
Table 3-3. Valve and Valve Seat Specifications
SERVICE WEAR LIMITS NEW COMPONENTS VALVE
0.965 mm 0.0038 in. 0.0254-0.0762 mm 0.001-0.003 in. Fit in guide (exhaust)
0.965 mm 0.0038 in. 0.0254-0.0762 mm 0.001-0.003 in. Fit in guide (intake)
2.286 mm 0.090 in. 1.016-1.575 mm 0.040-0.062 in. Seat width
52.8828 mm 2.082 in. 51.511-52.426 mm 2.028-2.064 in. Stem protrusion from cylinder valve pocket
Table 3-4. Valve Spring Specifications
SERVICE WEAR LIMITS NEW COMPONENTS VALVE SPRING
59.1 mm (min) 2.325 mm (min) 59.1 mm 2.325 in. Free length
61.2 kg 135 lbs Intake 1.850 in. (closed)
141.5 kg 312 lbs Intake 1.300 in. (open)
HOME
2010 XB Service: Engine 3-3