Brooks Automation
104
278580 Revision A
7 Operation
LF80C ZeniD RFID Reader
7.3 Operation of SECS Protocol
Product Manual
Parameter 123
(0x7B)
Fine version
This parameter is used to query the fine version.
7.3.7
SEMI E99
Introduction
The purpose of the Carrier ID reader/writer functional standard is to
provide a common specification for concepts, behavior and services
provided by a carrier ID reader/writer to an upstream controller. A standard
interface increases the interchangeability of a carrier ID reader/writer, so
that users and equipment suppliers have a wide choice.
Scope:
The interface standard addresses the functional requirements for a
generic carrier ID reader/writer interface with an upstream
controller.
The specification includes the required behavior and required
communications for a carrier ID reader and writer.
The specification does not require, define or prohibit asynchronous
messages sent by the carrier ID reader or writer.
This standard does not purport to address safety issues, if any,
associated with its use.
Parameter
Value
37
1
42
0
43
8
44
0
45
0
