Brooks Automation
12
278580 Revision A
4 Safety Instructions
LF80C ZeniD RFID Reader
4.7 Additional Information
Product Manual
4 . 7
A d d i t i o n a l I n f o r m a t i o n
Read and understand all safety and product manuals prior to
installing and operating the device.
This documentation was written for specifically trained personnel.
Installation, operation and troubleshooting may only be carried out
by specifically trained personnel.
Retain this product manual. Keep this documentation in a location
that is accessible to all personnel involved with the installation, use
and troubleshooting of the device.
Follow all warnings. Follow all warnings on and in the device and in
the documentation.
Install the device only in accordance with the manufacturer's
instructions.
Use only the accessories and cables from the manufacturer.
Troubleshooting that is not described in Chapter
Î
Service and
Troubleshooting may only be performed by the manufacturer.
People with hearing aids should be aware that the radio signals
emitted by the device can cause annoying noises in the hearing
aid.
Do not connect the device to power supplies such as normal
household electrical outlets. The device should only be connected
to power supplies as specified in this document.
DANGER
Risk of fire and explosions
Fire and explosions may occur within the vicinity of the device.
Smoking, open flames and fire are strictly prohibited in the vicinity of the
device. Do not store any flammable liquids within the hazardous area.
Keep a fire extinguisher in the vicinity of the device.
WARNING
Warning against electromagnetic radiation
Electromagnetic radiation develops when transmitting and receiving
data.
All Brooks RFID devices of the LF family comply with the standard EN
50357:2001.
