Brooks Automation
278580 Revision A
3
LF80C ZeniD RFID Reader
2 Declaration of Conformity
Product Manual
2.1 USA - Federal Communications Commission (FCC)
2
D e c l a r a t i o n o f C o n f o r m i t y
This chapter gives you an overview of the following topics:
Î
USA - Federal Communications Commission (FCC)
Î
Europe - CE Conformity
2 . 1
U S A - F e d e r a l C o m m u n i c a t i o n s
C o m m i s s i o n ( F C C )
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference and followed, read
and understood by all persons working with the device (especially
the safety information)
This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, in accordance with part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception - this can be determined by turning the equipment off and on -
the user is encouraged to try to correct the interference using one or more
of the following measures:
Reposition or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet to a circuit other than the one
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
assistance.
