Brooks Automation
8
278580 Revision A
4 Safety Instructions
LF80C ZeniD RFID Reader
4.3 Area of Application and Symbols
Product Manual
4 . 3
A r e a o f A p p l i c a t i o n a n d S y m b o l s
The device was constructed according to state-of-the-art technology and
recognized safety regulations. In order to prevent any risks to life and limb
of the user, third parties or damage to the device, only use the device for its
intended purpose and in perfect condition with regard to safety.
Bodily injuries and/or property damage resulting from non-compliance with
the instructions given in the product manual are the responsibility of the
company operating the device or of the assigned personnel. Malfunctions
that could compromise safety must be eliminated immediately.
4.3.1
Safety Symbols – in compliance with 4844-2
Special safety symbols in accordance with DIN 4844-2 are used in the
corresponding passages in the text of this product manual and require
special attention depending on the combination of signal word and symbol.
No da
mage
ATTENTION
This signal word warns of
malfunctions and may only be used if
no damage to health can occur.
IMPORTANT
This signal word indicates cross-
references and ways in which
operations are facilitated. It excludes
all risks of property damage and
injury risks.
DANGER
Danger to life, risk of injuries or damage to property
Risks exist when disregarding the product manual and the safety
instructions therein.
Carefully read the product manual before initial commissioning. Perform
the required safety measures before initial commissioning.
Follow the general safety information as well as the special safety
information given in other chapters.
WARNING
Risk of injuries when disregarding safety symbols
Risks exist when disregarding warnings in the product manual.
Please heed the warnings.
nbb
