Brooks Automation
278580 Revision A
149
LF80C ZeniD RFID Reader
8 Service and Troubleshooting
Product Manual
8.9 Protocol Switching
8 . 9
P r o t o c o l S w i t c h i n g
It is possible to change the type of protocol on a power-up reset. If the read
and the write buttons are pressed at the time of power-up reset, the reader
changes the protocol type from SECS to ASCII or ASCII to SECS. Wait until
the Input or Output LED does not change and light up. Release the buttons
to start the reader with the new protocol type.
8 . 1 0 S o f t w a r e R e l e a s e s
8 . 1 1 C u s t o m e r S e r v i c e
For Technical Support:
Location GUTS®
Contact
Number
North America
+1-800-FOR-GUTS (1-800-367-4887)
+1-978-262-2900
49-1804-CALL-GUTS
(+49-1804-2255-4887)
Japan +81-45-477-5980
China
+86-21-5131-7066
886-3-5525225
Korea +82-31-288-2500
Sin65-6464-1481
Visit us online:
www.brooks.com
Release
Date
Version
Description
June 2011
RIV5.0
Basic version
March 2013
RIV5.1.3/
RS2V51
Hardware version up to 25
characters, factory settings by serial
UDP message
