1 689 989 000
2013-05-02
|
Robert Bosch GmbH
Symbols used | EPS 200 | 27
en
1. Symbols used
1.1
In the documentation
1.1.1
Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequenc-
es of the hazard as well as preventive action. Warning no-
tices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word
Probability of
occurrence
Severity of danger if in-
structions not observed
DANGER
Immediate
impend-
ing
danger
Death
or
severe
injury
WARNING
Possible
impending
danger
Death
or
severe
injury
CAUTION
Possible
dangerous
situation
Minor
injury
1.1.2
Symbols – Designation and explanation
Symbol Designation
Explanation
!
Attention
Warns about possible property damage.
i
Information
Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps.
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result
There is a visible final result on com-
pletion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
2. User information
2.1
Important notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Diesel Test Equipment". These instructions must be care-
fully studied prior to start-up, connection and operation
of the EPS 200 and must always be heeded.
2.2
Safety instructions
All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Diesel Test Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the EPS 200 and must al-
ways be heeded.
2.3
Electromagnetic compatibility (EMC)
The EPS 200 satisfies the requirements of the EMC di-
rective 2004/108/EG.
i
The EPS 200 is a class/category C2 product as
defined by EN 61 800-3. The EPS 200 may cause
high-frequency household interference (radio inter-
ference) so that interference suppression may be
necessary. In such cases the user may be required to
take the appropriate action.
